PompaCelup.com

Spesialis Pompa Celup

Produk Kami



Pompa Centrifugal Pedrollo HFm Series (Industry)

Pompa Centrifugal Pedrollo HFm Series (Industry)
Description

RANGE OF PERFORMANCE
Flow rate up to 600 l/min (36 m³/h)
Heads up to 39 m

LIMITS OF USE
Manometric suction lift up to 7 m
Liquid temperature up to + 90°C
Environment temperature up to + 40°C

INSTALLATION AND USE
THE HF SERIES IS RECOMMENDED FOR CIVIL, AGRICULTURAL AND INDUSTRIAL APPLICATIONS. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM
LAKES, RIVERS, WELLS, OR FOR INDUSTRIAL APPLICATIONS THAT NEED TO ACHIEVE LARGE FLOW RATES AT MEDIUM-LOW HEADS.

The pumps must be installed in enclosed places, or at least protected against inclement weather.

CONSTRUCTION CHARACTERISTICS
PUMP BODY: cast iron, with threaded ports ISO 228/1.
IMPELLER: brass, of the type with centrifugal radial flow.
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
MECHANICAL SEAL: ceramic - graphite - NBR.
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
HFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector.
HF: three-phase 230/400 V - 50 Hz.
INSULATION: class F.
PROTECTION: IP 44.

 

 

Copyright www.PompaCelup.com © 2015. All Rights Reserved.