Pompa Celup Pedrollo Drainase ZDm 1A-E/1AR-E(AUTO)

Pompa Celup Pedrollo Drainase ZDm 1A-E/1AR-E(AUTO)

RANGE OF PERFORMANCE
Flow rate up to 300 l/min (18 m³/h)
Head up to 14 m

LIMITS OF USE
Depth up to 5 m
Liquid temperature up to + 40°C
Passage of suspended solid bodies up to Ø 10 mm
Drainage level 15 mm from the bottom
For continuous duty: minimum immersion 180 mm from pump base

INSTALLATION AND USE
DESIGNED FOR DRAINING CLEAR OR SLIGHTLY DIRTY WATER, THEY ARE SUITABLE FOR DOMESTIC USE, FOR DRAINING FLOODED AREAS SUCH AS CELLARS AND FOR EMPTYING TANKS AND RESERVOIRS; THEY ARE OUTSTANDING IN BOTH THEIR SIMPLICITY OF INSTALLATION AND THEIR RELIABILITY IN FIXED INSTALLATIONS WITH AUTOMATIC OPERATION.

CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: cast iron, with threaded port ISO 228/1.
MOTOR CASING: stainless steel AISI 304.
SUCTION GRID: stainless steel AISI 304.
IMPELLER: open type, in technopolymer.
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
MECHANICAL SEAL: ceramic - graphite - NBR.
MOTOR: submersible asynchronous single-phase for continuous duty.
ZDm: single-phase 220÷240 V - 50 Hz with capacitor and thermal overload protector.
INSULATION: class F.
PROTECTION: IP 68.