Pompa Centrifugal Pedrollo F Series (Industry)

RANGE OF PERFORMANCE
Flow rate up to 2000 l/min (120 m³/h)
Head up to 60 m

LIMITS OF USE
Manometric suction lift up to 7 m
Liquid temperature from -10°C to + 90°C
Environment temperature from -10°C to + 40°C
Max. pressure in the pump body 10 bar (PN10)

INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
THIS SERIES IS SUITABLE FOR SUPPLYING AND MOVING WATER, IN COOLING, HEATING, CIRCULATING AND CONDITIONING SYSTEMS, FOR FIRE FIGHTING, IRRIGATION, INDUSTRIAL AND AGRICULTURAL APPLICATIONS.
Manifacture in accordance with dimensional standards EN 733 - DIN 24255 ensures models are fully interchangeable.The design allows the pump body to be removed without disconnecting it from the pipes (back pull out).
The pumps must be installed in enclosed places, or at least protected  against inclement weather.

CONSTRUCTION CHARACTERISTICS
PUMP BODY: cast iron, complies with dimensional standards EN 733 - DIN 24255 and UNI 7467-NF E-44-111, with flanged suction and delivery ports complete with threaded steel counterflanges.
BODY BACK-PLATE: cast iron.
IMPELLER: brass for models F32/160, F32/200, F40/160, F40/200, F50/125 e F50/160.
IMPELLER: cast iron for models F40/250, F50/200, F50/250, F65/125, F 65/160, F65/200, F80/160, F100/160
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
MECHANICAL SEAL: ceramic - graphite - NBR.
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, asynchronous type with high efficiency (class EFF1 for powers from 4 to 22 kW), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
Fm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector (up to 1.5 kW).
F: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 22 kW.
INSULATION: class F.
PROTECTION: IP 44.