Pompa Celup Pedrollo Air Bersih TOP MULTI II

Pompa Celup Pedrollo Air Bersih TOP MULTI II

RANGE OF PERFORMANCE
Flow rate up to 100 l/min (6 m³/h)
Head up to 30 m

LIMITS OF USE
Submersion depth up to 10 m
Liquid temperature up to + 40°C
Maximum sand content 50 g/m3
Emptying level up to 30 mm from the bottom

INSTALLATION AND USE
THEY ARE RECOMMENDED FOR PUMPING CLEAN WATER WITH A SAND CONTENT NO HIGHER THAN 50 g/m³.
THEIR HIGH EFFICIENCY AND RELIABILITY MAKES THEM SUITABLE FOR SUPPLYING DOMESTIC WATER FROM TANKS, RESERVOIRS OR RELATIVELY DEEP WELLS, DRAWING RAINWATER FROM CISTERNS, WATERING BY HAND OR FEEDING.

CONSTRUCTION CHARACTERISTICS
DELIVERY BODY AND SUCTION GRID: glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1.
IMPELLERS and DIFFUSERS: technopolymer.
DIFFUSER CONTAINER: stainless steel AISI 304.
MOTOR SUPPORT: stainless steel AISI 304.
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
DOUBLE SEAL: mechanical seal ceramic -silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
MOTOR: asynchronous, for continuous duty.
TOP MULTI: single-phase 220÷240 V - 50 Hz with capacitor and thermal overload protector.
INSULATION: class F.
PROTECTION: IP 68.
REGISTERED MODEL n° 72765.

STANDARD FEATURES:
TOP-MULTI Float switch
Neoprene power cable “H05 RN-F” length 10 metres with Schuko plug.
Hosetail.
Coupling with non-return valve.