Pompa Celup Pedrollo Air Bersih/Drainase Stainless RXm2 (AUTO)

Pompa Celup Pedrollo Air Bersih/Drainase Stainless RXm2 (AUTO)

RANGE OF PERFORMANCE
Flow rate up to 220 l/min (13.2 m³/h)
Head up to 10 m

LIMITS OF USE
Depth up to 10 m
Liquid temperature up to + 50°C
Liquid temperature up to + 60°C for intermittent duty.
Liquid temperature up to + 90°C for intermittent duty maximum 3 minutes.
Passage of solid bodies up to Ø 10 mm
Drainage level:
14 mm from the bottom for RX 2

INSTALLATION AND USE
RX PUMPS ARE SUITABLE FOR DRAINING CLEAR WATER WITHOUT ABRASIVE PARTICLES.
THE CONSTRUCTION GUARANTEES SIMPLE AND SAFE OPERATION DUE TO THE COMPLETE COOLING OF THE MOTOR BY THE PUMPED WATER, AND THE DOUBLE SEAL DESIGN. THEY ARE RECOMMENDED FOR FIXED INSTALLATIONS, EMERGENCY DRAINING OF SMALL FLOODED AREAS (BASEMENT ROOMS, CELLARS, GARAGES), FOR DISPOSAL OF DIRTY WATER USED IN THE HOME BY WASHING MACHINES AND DISHWASHERS AND FOR DRAINING COLLECTION TRAPS.

CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304, with threaded port ISO
228/1.
SUCTION GRID: stainless steel AISI 304.
IMPELLER: stainless steel AISI 304.
MOTOR SUPPORT: stainless steel AISI 304.
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
DOUBLE SEAL: mechanical seal ceramic - graphite - NBR, with
oil barrier chamber and inner lip seal to protect the seal in the event
of dry running.
MOTOR: submersible asynchronous single-phase for continuous duty.
RXm: single-phase 220÷240 V - 50 Hz with capacitor and thermal
overload protector.
RX: three-phase 380÷415 V - 50 Hz.
INSULATION: class F.
PROTECTION: IP 68.
REGISTERED MODEL.

STANDARD FEATURES:
RXm (single-phase) float switch. Neoprene power cable “H05 RN-F” length 5 metres with Schuko plug.
RX (three-phase) Neoprene power cable “H05 RN-F” length 5 metres.